PM107-R

namile enpla unique technology implements stable resistance values (10⁶ ohms to 10⁹ ohms) Aimed at 10⁷ ohms as antistatic material Resistance value can be adjusted according to customer's request Eco-friendly materials that have obtained eco-friendly certification (RCS) through the use of recycled materials

CAST NYLON

Cast nylon has improved mechanical, thermal and chemical resistance properties compared with polyamide and by injection or extrusion. By the addition of various additives such as colorants Mp52oil, lubricants and antistatic agents, the properties can be reinforced by anionic polymerization of caprolactam.

MCXT

MCXT is an extrusion product between the diamater 15 to 35mm rods, which have had difficulties by existing Cast method, produce by NAMIL's own technology. It is a proprietary product and it has good resistance to wear and friction as Cast Nylon.

POM-C

Polyoxymethylene, copolymer grade, is a crystalline polymer and can be used in temperature up to +100℃ The copolymer grade has excellent mechanical features, stability to humidity and easy of machining and bettr thermal stability and stronger resistance to alkalis than acetal homopolymer.

HDPE

Polyethylene has a good chemical resistance to almost all acids and bases, detergents and hot water. It has good insulation properties as well and is easy to weld. The operating temperature is from -50℃ to +90℃

PP

Polypropylene shows a high mechanical strength and a tensile strength, but a low notched impact strength. The mechanical features are better than those of HDPE. It is easy to weld. At minus temperature it can get brittle. The chemical and electrical properties are very good. The continuous operating temperatures ranges between +5℃ and +100℃

ABS

ABS is thermoplastic resin made from three-dimensional monomer of Acrylonitrile, Butadiene, Styrene. It has a wide range of applications such as electric/electronic parts, automotive parts and so on. It is strong shows a good scratch resistance and has good dimensional stability. ABS can be used in temperatures ranging from -50℃ to +70℃

PC

Polycarbonate is a thermoplastic polymer and shows a high rigidity and an very high impact strength. The operating temperature ranges from -60℃ to approx. +120℃

PET

PET shows high tensile, high mechanical stength, high rigidity, low friction and high dimensional stability The temperature resistant is from -20℃ to appox. +100℃

PVDF

PVDF shows a higher tensile strength pressure resistance and dimensional stability than PTFE, but friction and insulation properties are lower. PVDF has a high me resistance and dimensional stability than PTFE, but friction chanical strength and toughness at lower. PVDF has high mechanical strength and toughness at lower. PVDF has a high mechanical strenth and toughness at lower temperature and its temperature ranges from -30℃. to 150℃

PA6, PA6.6

PA 6 produced by extrusion is a crystalline engineering plastic which has high thermostability and high o stiffness. I is used for various applications with great hardness and impact strenghth. The temperature resistant is from -40℃ to approx. +100℃

PEI(Ultem)

Polyetherimide has a high mechanical strength in connection with a good chemical and heat resistance(operating temperature up to +170℃). good dimensional stability and creep resistance